Here's how to fix a dead SSD hard-drive

Hera's how to fix a late SSD hard-drive

Being an creative person his entire life while also playing handball at a professional level, Vladimir has also developed a love for all things computer-concomitant. With an congenital fascination for research and analytic thinking, and realizing... Read more

Updated: Dec 17, 2021

Posted: September 2019

Is your SSD hard drive dead? If you want to know how to fix the dead SSD hard drive, you came to the right place.

We understand how important it is for you to be competent to access the entropy stored on your SSD drive. Sightedness information technology flush it to allow access, or even run, can be a terrifying affair.

Getting access normally to your files is determinant in this day and age. Because virtually complete our selective information is stored in a digital environment, SSD's can offer a scurrying and secure selection.

If your SSD is motionless in working condition but does not body of work properly, reading this clause will help you regain access to your files.

Note: In the case that your SSD is broken, these methods will non fix it. You will involve to contact a specialized service to seek a repair.

Please follow the steps carefully to avoid any other complications.

Want to fix your dead SSD Winchester drive? Try these methods

1. Unplug and reconnect your SSD drive

Flatbottom though this method acting might seem unmistakable, it has proven useful in the case of some users. For this reason, we chose it A the first recommended solution for your problem.

Follow these steps to try it:

Completely put off your PC, and unplug the power cable.
Unplug your SATA cable from the SSD but entrust the power cable connected.
Plug the PC power line back in -> turn it happening -> enter BIOS.
Let your PC sit lazily in BIOS for 30 minutes -> turn off your PC.
Plug the SATA cable second into your SSD and boot your PC into BIOS again.
Navigate to the Boot setup menu -> make sure the PC is set to boot from the SSD.
Launch Windows and contain to determine if your SSD drive is constituted normally.
If this method hasn't verified reusable, please follow the next methods.

2. Update your SSD's firmware

Press the Win+X keys at the same time.
Choose the Twist Manager from the bill of fare.
Flourish the Disk drives section -> right-click your SSD drive -> select Properties.
Choose the Inside information tab -> get across the flatten-down bill of fare -> choose Hardware Ids.
Click Ok to save the settings.
Run the SSD microcode update tool and follow the on-screen instructions to complete the update process (specifics wish vary depending on your SSD brand).

3. Update your SSD drivers

Press Win+X keys -> select Device Manager.
Expand the Disk drives section.
Right-click your SSD device -> choose Update driver.
Follow the happening-sort instructions and restart your PC when done.

Instead, you can practice dedicated updater software such as DriverFix that will automatically scan your Personal computer for outdated drivers and install the corresponding version for your hardware.

4. Run program line in PowerShell (Admin)

Fourth estate Win+X keys -> select PowerShell (Admin).
Character chkdsk /f c (replace the 'c' with the letter of your SSD thrust) -> weightlift Inscribe to run the command.
Wait for the process to complete -> type exit -> press Enter to close the prompt.

Conclusion

We hope that you found the methods presented in that list facilitatory.

Delight flavor free to let U.S.A roll in the hay if you did, or if you have any suggestions. You can do and then by using the commentary department on a lower floor.